Auto manual selector switch plc programming

The Third 1-bit selector is located on the top (DIP switch selector 3 in figure 2), used to configure the voltage of control signals. For the safety of fileslib. The mode selector switch is set to RUN or RUN-P. There is no automatic hot restart or automatic cold restart parameterized for POWER ON. The restart (warm The main and override control outputs are fed to a low signal selector. The override setpoint is set to There is one auto manual switch for both loops. For operating the CPU via the PC the program "PLC-Tool" is included in Place the function selector in the position STOP and switch it to MR and.
serves as control module with manual override function for controlling one 3-speed motor. There is a rotary switch for the functions "Auto"-"Off"-"Man"
This filling machine has three operation modes which are off, manual and automatic. These modes are determined by the three-position selector switch.