Cisco ucs fabric interconnect manual failover

This operation can only be performed in the Cisco UCS Manager CLI. You must force the failover from the primary fabric interconnect. fileslib. How do you change a fabric interconnect? interconnect to the new fabric interconnect. a) Connect the L1/L2 cables that were disconnected to the replacement fabric interconnect. b) Connect the data cable according to the labels that you created in Step 2. c) Connect the power cable to the fabric interconnect and it will automatically boot and run POST tests. A user-forced condition may occur during the firmware upgrade of the Fabric Interconnects. Firmware is upgraded on the subordinate Fabric Interconnect first and
Walks through the process to switch FI cluster lead. CIsco UCS Manager - Switch Over Duration: 1:07 Posted:
This operation can only be performed in the Cisco UCS Manager CLI. You must force the failover from the primary fabric interconnect.